Tile Saw, Wet 7 in., with Stand In Stock Now

Description

Ridgid 7 in. Job Site Wet Tile Saw with Stand (R4031S). Similar to our other wet tile saw, but this one has an overhead cutting wheel and larger capacity–it can cross cut a 24 inch tile!

Features of this item include:

• 7 inch blade
• Cut capacity 24 in. rip, 18 in. diagonal and 2-1/4 in. depth
• Foldable stand
• Laser alignment system aligning cutting wheel with the cut line
• Beveling head for 0 degree and 45 degree bevel cuts
• Plunging head
• Submersible pump providing water to cutting wheel
• 6 ft cord
• Sliding table is ~3 ft high when stand is in highest position

This item comes with a folding stand.

Often Used With: Tile Tool Set

Similar To: Tile Saw, 7 in.

Intended Uses

Designed to cut man-made tile, pavers, and stone tile using straight line cutting operations such as cross cutting, mitering, ripping, and beveling.

Special Instructions

• Make sure the miter gauge is positioned so that it doesn't get cut by the cutting wheel!!

• The beveling feature can ONLY cut at 0 deg and 45 deg and NOT any other angle in between.

• To rinse the water tray, you will need to remove the pump, pump power cord, and water hose!

• When placing the frame back on the water tray, make sure the power cord and water hose are not being pinched!

• Drain plug is easy to cross thread–take care to get it on right so it won't leak on your shoes!

Tool Resources

Diagram

Image source: Operator's manual

Instructions

Not at this time--see "Resources," below

Resources

• PDF: Operator's manual
• Video: "RIDGID How-To Video: For Tile Saws" by Ridgid Tools (17:07m). Start at 4:47m and stop at 10:30m. Video demonstrates set-up, then various cuts including Cross Cuts, Diagonal and Miter Cuts, Plunge Cuts, and L-Cuts. The saw in the video is not identical, but very similar to the DTL saw.