Table Saw, Jobsite Benchtop In Stock Now

Description

DeWalt 10" Jobsite Table Saw (DWE7491). Table saws are used for making precision rip cuts, crosscuts, and dado cuts in wood. This item is a portable, benchtop version of our other DeWalt, Jobsite Table Saw w/ Stand.

Features of this item include:

• 10 in. blade w/riving knife
• 32 - 1/2" max rip capacity
• 3-1/8 in. depth of cut at 90 deg.; 2-1/4 in. at 45 deg.
• 26-1/4 in. wide x 22 in. deep table 
• 2.5 in. dust collection port
• 15 Amp motor
• Rack and pinion fence adjustments w/material support/narrow rip cut auxiliary fence. 

This item includes onboard: push stick, blade guard, anti-kickback device, blade changing wrenches, miter gauge.

Similar to: Table Saw, Jobsite w/Stand; Table Saw, Benchtop

Intended Uses

Used for making three types of precise cuts on wood products: cross-cuts, ripping cuts, and dado cuts.

Special Instructions

• Remember to lock/unlock the fence with the rail lock lever before cutting/adjusting !

Tool Resources

Diagram

Image source: Instruction Manual

Instructions

Remember: When setting the depth of cut set the blade height from a lower position as opposed to setting it by lowering it from a higher position.

While the scale on the edge of the table is very accurate, always measure the distance from the fence to the blade (both front and back of blade) with a tape measure before cutting.

Resources

• PDF: Instruction Manual
• Video: "Using A Table Saw For The First Time | Beginner" by Training Hands Academy (5:14m). Just the basics & safety!
• Video: "Using A Table Saw for Beginners | Cutting" by Training Hands Academy (3:51m). The three common types of cuts on a table saw, demonstrated!