Flooring Nailer, Pneumatic In Stock Now

Description

Freeman 3-In-1 Flooring Nailer for Staples, T and L Cleats (Model: PFL618C). Are you installing tongue and groove hardwood floors that are ½ in. or ¾ in.?? If so, you're going to need this!

Features of this item include:

• Compatible with 3 types of fasteners with lengths, 1-½ in., 1-¾ in., and 2 in.:
  • Staples: 15.5 gauge; ½ in. crown
  • T-Cleats: 16 gauge
  • L-Cleats: 16 gauge
• Two baseplates (footplates): for ¾ in. hardwood flooring and for ½ in. ( ⅝ in. and 9/16 in. footplate) flooring
• Magazine capacity: L and T Cleats: 100 pcs / Staples: 120 pcs

This item comes with a tough bag and in it a mallet, a small bag with additional footplate, two allen keys, one open ended wrench, and an oil dropper.

Often used with: Air Compressor, 6 Gal; Air Hose

Intended Uses

Used for the installation of ½ in. to ¾ in. solid tongue and groove hardwood flooring.

Special Instructions

• Oil required: place four drops of oil in the air inlet before using and every 600-800 nail strikes after

• Operating air pressure 70-110 psi! Do not exceed 110 psi. Our compressors go up to 150, so turn the regulator knob to set the outlet pressure to the recommended air pressure!

• Connect the tool to the air hose before loading the magazine with cleats/staples!

Tool Resources

Diagram

Not at this time!

Instructions

Follow 'Special Instructions' before using nailer. To learn how to load nails, clearing jams, and where to nail into Tongue and Groove flooring, please refer to manual linked below.

Resources

• PDF: Instruction Manual
• Video: "Freeman PFL618 15.5/16 GA 2 in. Flooring Nailer - Installation of Tongue and Groove Flooring" by CPO Outlets (4:45m). Here's the only video I could find that shows how to use this nailer–unfortunately, it's not comprehensive!

This tool was donated: Thank you Dr. Drake!!