Cassette Lockring Tool Set In Stock Now

Description

Park Tool Cassette lockring tools for removal and installation of cassette lockrings--set of 3.

This set contains:

• Cassette Lockring Tool (Park Tool FR-5.2) fits Shimano, Sram, SunRace, Suntour.
• Cassette Lockring Tool With Guide (Park Tool FR-5.2GT) fits Shimano, Sram, SunRace, Suntour with through axles.
• Cassette/Bottom Bracket Tool (Park Tool BBT-5/FR-11) fits all Campagnolo cassette lockrings and 12 tooth Campagnolo bottom bracket cups.

This set of tools comes with a mosquito net baggie tote

Often Used With: Adjustable Wrench Set, Cassette Pliers

Intended Uses

Used for removing cassette lockrings.

Cassette Lockring Tool (FR-5.2): 

• Fits 12-spline cassette lockrings from Shimano:registered:, SRAM:registered: (including 1x), SunRace:registered:, SunTour:registered:, Chris King:registered: and others
• Fits most disc brake lockrings with 12 internal splines from Shimano:registered: and other brands
• Fits the top cap of some Rock Shox:registered: suspension fork models including Pike:registered:, Lyrik:tm:, SID:registered:, Revelation:tm:, Reba:registered:, and Paragon:tm:
• Hex-shaped base of tool fits 1" (25.4 mm) socket or wrench
• Center bore for axle clearance is 12mm

Cassette Lockring Tool (FR-5.2GT)--with 12 mm guide pin:

• Fits 12-spline cassette lockrings from Shimano:registered:, SRAM:registered: (including 1x), SunRace:registered:, SunTour:registered:, Chris King:registered: and others
• Fits most disc brake lockrings with 12 internal splines from Shimano:registered: and other brands
• Hex-shaped base of tool fits 1" (25.4 mm) socket or wrench
• 12mm guide pin stabilizes the tool when used with 12mm thru axle hubs

Cassette/Bottom Bracket Tool (Park Tool BBT-5/FR-11):

• Fits all Campagnolo:registered: cassette lockrings
• Also fits Campagnolo:registered: Record:tm:, Chorus:tm:, Centaur:tm:, and Athena:tm: bottom brackets
• The outside diameter of the BBT-5/FR-11 is 22.8mm and has 12 splines
• Center bore for axle or spindle clearance is 16 mm

Special Instructions

Please use a skewer or axle nut to hold the cassette lockring tool firmly in place when removing and installing the lockring when applicable!

Tool Resources

Diagram

Not at this time!

Instructions & Resources

• Web Copy: “Determining Cassette/Freewheel Type” by Park Tool--If you’re not sure whether you have a cassette or freewheel, check this out first!
• Video/Web Copy: “Cassette Removal and Installation” by Park Tool--(8min.)