Countersink Set, 3-Pc In Stock Now

Description

DeWalt 3-Pc Countersink Set. For those times when you want the head of the screw to be level or below the wood surface you're screwing into!

Features of this item include:

• 3 pieces: #6 (9/64 in.), #8 (11/64 in.), #10 (3/16 in.)
• Shank is a ¼ in. hex
• Drill, countersink (for cone shaped heads), and counterbore (for flat bottom bolts/screws) in one step!

This item comes with an allen key for the set screw and a plastic box.

Often Used With: Drill Driver

Similar To: Drill Bit Set

Intended Uses

Used to remove enough wood material to drive the screw head below the surface of your stock. It's a fancy way to drive screws, basically.

Special Instructions

• These countersinks are for wood and wood products only!
• Set screws are small–please keep track of them!

Tool Resources

Diagram

Not at this time!

Instructions

The allen key is to loosen and tighten the countersink set screw to adjust to the length of the screw you're driving.

Match the drilling depth of the countersink assemblage with the length of the screw you are using!

Resources

• Video: "How to Countersink Wood Screws" by The Fixer (8:04m). You can stop the video at minute 3:35m, where the discussion moves to wood and other drill bits.