Stapler/Brad Nailer In Stock Now

Description

Craftsman Professional Stapler (968515). Not much could be found about this stapler, so we've made a few educated guesses about it, below:

Features of this item include:

• Drives staples–Surebonder #4 and Arrow T-50 style staples (up to ⅜ in., maybe ½ in.)
• Likely drives #8 Surebonder brad nails (18 gauge, 9/16 in.) and #9 Surebonder pin nails (18 gauge, 9/16 in.), though it has not been tested
• Ergonomic reverse squeeze!

Similar To: Staple Gun; Hammer Tacker

Intended Uses

Used mostly for driving stapes, this item can likely drive brad nails–for securing trim molding, picture frames, and crafts, and pin nails, which can be used in most of the same applications as a brad nail, but do not have a nail head.

Special Instructions

Fasteners are loaded from bottom–Pull back plastic heel down and away from stapler body, insert staples or nails (Refer to diagram etched on front of stapler to load nails on the correct side of stapler.)

Tool Resources

Diagram

Not at this time!

Instructions

Fasteners are loaded from bottom–Pull back plastic heel down and away from stapler body, insert staples or nails (Refer to diagram etched on front of stapler to load nails on the correct side of stapler.)

Resources

Not at this time!

This tool was donated: In memory of Steve Hansen